Downloads

Download Home Revise for Android and Windows

Choose the version that matches your device, then follow the quick setup instructions below to start learning with Home Revise.

Android TV Build APK

Home Revise for Android TV

For supported Android TV devices

Download the Android TV build APK if you want to install Home Revise on a television or Android TV box.

If the APK is transferred from another device, make sure the file is fully copied before starting the installation.
Show installation steps
  1. Download the APK file to your Android TV device or transfer it using a USB drive.
  2. Open a file manager on the TV and select the downloaded APK.
  3. Allow installation from unknown sources if prompted by the device.
  4. Complete the installation and launch Home Revise TV from your apps list.
  5. Now Launch open App in mobile and after login open sidebar.
  6. Select Login on TV -> and scan QR code using Mobile and Proceed.
Android Offline APK

HomeRevise Connect for Android

Android 9 and above - phones, tablets, Android TV and classroom panels

The offline build of Home Revise. Study content is added from an SD card, USB drive or a direct download, and lessons then play without an internet connection.

This link always downloads the newest published version. When an update is released, use the same link again.
Supported devices
  • Android version: Android 9.0 (Pie) or higher, tested up to Android 16. Android 8.1 and older cannot install it.
  • Devices: phones, tablets, Android TV boxes and sticks, Android TV televisions and interactive classroom panels
  • Processor: 64-bit ARM, 32-bit ARM and 64-bit Intel/AMD (x86_64) - all in one file, so there is no separate 32-bit or 64-bit download
  • Not supported: 32-bit Intel/AMD (x86) devices
  • Touchscreen: not required - works fully with a TV remote or D-pad
  • Camera, microphone: none required, so it installs on TV boxes and wired classroom panels
Minimum System Requirements
  • OS: Android 9.0 or higher
  • RAM: 2 GB
  • Free storage: 1 GB for the app, plus about 8 GB per standard for study content (approximately 80 GB if all 10 standards, 1st to 10th, are installed)
  • Display: 1280x720 or higher
  • Other: internet connection for activation and updates; lessons play offline afterwards
Recommended System Requirements
  • OS: Android 11 or higher
  • RAM: 4 GB or more
  • Free storage: 128 GB internal storage, or a 64 GB or larger SD card, for the full offline library
  • Display: 1920x1080
  • Other: broadband connection (5 Mbps or faster) while content is downloading
Good to know before you install
  • HomeRevise Connect installs alongside the Play Store app - it does not replace it, and both can be on the same device.
  • The two are signed separately, so they cannot update each other. Update HomeRevise Connect from inside the app, or from this page.
  • App data is left out of Android backups on purpose, so a licence can never be copied to another device.
  • The app asks for Install unknown apps to apply its own updates, and All files access to read study content from an SD card or USB drive.
  • Android 10 only: if SD card or USB folders look empty after you allow storage access, uninstall the app and install it again.
Installation steps - phones and tablets
  1. Tap Download Latest APK on the phone or tablet.
  2. If the browser warns about the file type, choose Download anyway.
  3. Open the downloaded APK from the notification bar, or from the Downloads folder in your Files app.
  4. When Android asks, tap Settings, turn on Allow from this source, then press Back.
  5. Tap Install, then Open.
  6. Sign in with your Home Revise account.
  7. To add study content, open the sidebar and choose Add from SD card. If the device has no folder picker, tap Allow storage access.
Installation steps - Android TV and classroom panels
  1. Download the APK on a computer or phone and copy it to a USB drive.
  2. Plug the drive into the TV or panel and wait until the device shows it is ready.
  3. Open a file browser on the TV and go to the USB drive. No file browser? Install the one in the next card first.
  4. Select the APK. When asked, allow installation from unknown sources, then press Install.
  5. Launch HomeRevise Connect from the apps list or the Android TV home screen.
  6. On your phone, open the Home Revise app, log in and open the sidebar.
  7. Choose Login on TV, scan the QR code on the TV screen and proceed.
  8. For study content, open Add from SD card on the TV, tap Allow storage access, then Open settings and turn on "Allow access to manage all files" for HomeRevise Connect.
Helper App

File Browser for Android TV

Only needed if your TV or box has no Files app

Many Android TV boxes ship without a file browser, so an APK copied to a USB drive cannot be opened. This free, open-source file browser works with the TV remote and lets you install HomeRevise Connect from the drive.

Skip this if your device already has a Files, File Manager or Downloads app.
What it helps with
  • Opening and installing an APK from a USB drive or SD card.
  • Copying study content from a USB drive to the device.
  • It does not fix the "no folder picker" message inside HomeRevise Connect - tap Allow storage access in the app instead.
Minimum System Requirements
  • OS: Android 5.0 or higher
  • Free storage: under 50 MB
  • Input: TV remote, D-pad or touch
Show installation steps
  1. Download the file browser APK on a computer or phone.
  2. Copy it to the same USB drive as the HomeRevise Connect APK.
  3. On the TV, open Settings > Apps > Security & restrictions and turn on Unknown sources.
  4. Install the file browser. If the TV cannot open any APK at all, install it once with a sideload helper such as Downloader or Send Files to TV.
  5. Open the file browser, go to the USB drive and select the HomeRevise Connect APK.
  6. Allow installation when asked, then follow the HomeRevise Connect steps.
Official Windows App

Home Revise for Windows 10 & 11

Recommended for Windows 10 and Windows 11

Download the official Windows app for the latest desktop experience on modern Windows systems.

Minimum System Requirements
  • OS: Windows 10 version 17763.0 (1809) or higher, or Windows 11
  • Architecture: x64 or ARM64
  • Processor: Dual-core 1.6 GHz or faster
  • RAM: 4 GB
  • Free disk space: 1 GB for the app, plus space for downloaded content
  • Display: 1366x768 minimum
  • Other: Sound device, touch screen or mouse and keyboard, internet connection for activation and content download
Recommended System Requirements
  • OS: Windows 11, 64-bit (latest updates installed)
  • Processor: Quad-core 2.4 GHz or faster (Intel Core i3 10th gen / AMD Ryzen 3 or better)
  • RAM: 8 GB
  • Free disk space: SSD with 20 GB or more free for the full offline content library
  • Display: 1920x1080
  • Other: Up-to-date graphics driver, speakers or headphones, broadband connection (5 Mbps or faster)
This version is intended for Windows 10 and 11 systems and is the best choice for current Windows PCs.
Show installation steps
  1. Open the Microsoft Store link on your Windows Laptop, Desktop or tablet.
  2. Tap Install and wait for the app to download automatically.
  3. Launch the app from the desktop or Start menu.
  4. Log in with your Home Revise account and begin learning.
Windows .NET Version

Home Revise .NET Desktop Version

Supports Windows 7, 8.1, 10, 11 and Windows Server 2019

Download the .NET desktop build if you need a version compatible with older Windows systems as well as newer ones.

Minimum System Requirements
  • OS: Windows 7 SP1, 8.1, 10, 11 or Windows Server 2019 (32-bit or 64-bit)
  • Processor: Dual-core 1.6 GHz or faster
  • RAM: 4 GB (Windows 7 / 8.1 will run in 3 GB)
  • Free disk space: 1 GB for the app, plus about 8 GB per standard for downloaded study content (approximately 80 GB if all 10 standards, 1st to 10th, are downloaded)
  • Display: 800x600 minimum
  • Other: Sound device, mouse and keyboard, internet connection for activation and content download, Windows virtual memory (page file) left enabled
Recommended System Requirements
  • OS: Windows 10 or 11, 64-bit
  • Processor: Quad-core 2.4 GHz or faster (Intel Core i3 10th gen / AMD Ryzen 3 or better)
  • RAM: 8 GB
  • Free disk space: SSD with 100 GB or more free - the full offline library for all 10 standards (1st to 10th) needs approximately 80 GB
  • Display: 1366x768 or higher
  • Other: Up-to-date graphics driver, speakers or headphones, broadband connection (5 Mbps or faster)
Software Prerequisites
Windows 7 SP1 only - support files

For 64-bit Windows 7, 8, 8.1 - download both:

For 32-bit Windows 7, 8, 8.1 - download both:

  • Take one set only - the 64-bit ZIP with the 64-bit BAT, or the 32-bit ZIP with the 32-bit BAT.
  • Keep the ZIP and the BAT together in the same folder - the BAT unpacks the ZIP itself.
  • Right-click the BAT and choose Run as Administrator. It checks which Windows updates the PC already has and installs only the missing ones, then says if a reboot is needed.
  • Not sure which Windows you have? Control Panel > System shows "32-bit" or "64-bit". Running the wrong BAT is harmless - it stops and names the right one.
  • LAN Sharing support
  • Low-resolution display support (800x600)
  • Video playback engine is bundled - no separate codec pack needed
Please note: 4 GB of RAM is a hard minimum on Windows 10 and 11. On a 2 GB machine the app may freeze during video playback or while opening large books, because Windows itself uses most of that memory.
Not sure which one to pick? Most PCs made after 2010 are 64-bit - choose 32-bit only if unsure or on very old hardware.
Show installation steps
  1. Download the .NET desktop exe to your Windows PC.
  2. Install Microsoft .NET Framework 4.8 or higher before launching the app if it is not already available on your system.
  3. If needed, install Firefox 115 using the offline installer provided above.
  4. On Windows 7 only: download the Windows 7 support files above - the ZIP and the BAT that match your Windows, 64-bit or 32-bit.
  5. Put that BAT and ZIP in the same folder, right-click the BAT and choose Run as Administrator. It installs the missing Windows updates and the TLS settings the app needs, then tells you if a reboot is required - reboot before continuing if it says so.
  6. Install the exe with Run as Administrator and complete the installation.
  7. Now open the installed exe with Run as Administrator and sign in with your Home Revise account.